Clickfix Aluminium Coping - Technical Description

Building Products / Clickfix Aluminium Coping / Technical Description

Clickfix Aluminium Coping - Technical Description

Authority
Clickfix ix is a registered trademark of Alifabs. The coping fixing system is covered by British patents.

Composition, manufacture
Copings are fabricated from alloy sheet grade 1050A - H14 / 4015-H12 to BS EN 485/515/573 2mm thick. Fixing straps are extruded aluminium alloy type E6082T6 or E6063T6 to BS 1474: 1987, with an extruded neoprene seal bonded to the top.

Accessories
Standard 90° corners and T junctions, stopends or closed ends, upstands and straight joints are illustrated overleaf. Irregular corners can also be made. All are mitred, welded and smoothly finished on the front face.

Shape, size
The standard coping section is illustrated. When specifying or ordering, state the total wall width including any finishes, rendering, asphalt or flashings.

Standard lengths: 3m.

Appearance
Mill finish is standard. Polyester powder paint finishes, applied after fabrication, in a very wide range of colours to order. For most colours there is a choice of gloss, satin or matt finish.